HK-5B-II Double side auto welding carriage

Model Name:
HK-5B-II Double side auto welding carriage
Product Description
The main body is made of high strenght alloy aluminum,comppact structure,light and portable.With auto-welding device for double face horizontal welding;option for one torch or two torch as reuqired;the fixing holder for carriage can be adjusted in width and height epending on workpiece;application widely.

Previous : HK-6A-II Portable Wel-Twin Double Side Welding Tractor Carriage Two Torch

HK-5B-II Main features:

1.The main body is made of high strenght alloy aluminum,comppact structure,light and portable.

2.With auto-welding device for double face horizontal welding;option for one torch or two torch as reuqired;the fixing holder for carriage can be adjusted in width and height epending on workpiece;application widely.

3.Distortion can be reduced when two face welding by this carriage.

4.Permanent alnico and guide device are fixed under main body,which can prevent the carriage from deviating from the jointing line,the running speed is shown by number,welding can be continuous or discontinuous with high precision with high precision and easy operation.

5.Induction-switch on both end of carriage which will automatically ture off when welding is ending.

The whole machine

The spare parts of HK-5B-II

PRODUCTS

TYPE	HK-5B-II(Double side auto welding carriage)
size	500×290×420mm
Power	24V
Weight	10KG
Range of welding torch adjusting	up-down：40mm	range of working angle：±45°
Range of welding torch adjusting	fore and after：40mm	range of adjusting angle：±10°
walking speed	50～1900mm/min（nixie display indicator）
Moving	our-wheel drive(rubber wheel)
Operating function	No.1welding/not welding	No.2 welding/not welding
	start walking	7. stop walking
	choose walking direction（left-right）	8. adjust walking speed (nixie display indicator)
	continuous welding time	9. stop distance
	discontinuous welding time	10. arc retracting time (0～3.5 S)

welding wire diameter welding parameter		Φ1.2mm	Φ1.4mm	Φ1.6mm
current（A）	Down hand welding	120-300	150-380	180-430
	flush fillet welding	120-280	150-320	180-380
	horizontal welding	120-280	150-300	180-330
voltage（U）	U＝14+0.051 300A under U=0.041+16±1.50 above 300A U=0.041+20±2.0
distance between nozzle and workpiece（H）	Below 200A:　H=10～15mm 200～350A　 H＝15～20mm 350～500A　 H＝20～25mm
welding extension length（L）	The length is about 10 times welding wire diameter. It is L=10d

1.	Body	1set
2.	Regulated power supply DC24V	1set
3.	Standard power wire (220V/20M)	1set
4.	2P welding torch control wire 500mm	1set
5.	Fuse 2A	2sets
6.	Inner hexagon spanner	1pc each
7.	Certificate of qualification	1set