CG1-30sp-400 Portable multi torch oxy-fuel beveling and cutting machine

Nome do modelo:
CG1-30sp-400 Máquina de chanfrar e cortar oxi-combustível portátil multitocha
Descrição do Produto
“CG1-30SP-400” X beveling gas cutter is one of products. It is designed well and beautiful.We do technical innovations and optimizations for it based on the suggestions. This machine adopts new material, which improves the serviceability, durability heat-insulating property and practicability.The gas distributor adopts integrated flame failure control. You only adjust preheating flame and cutting oxygen one time. The performance of flame is kept in the next time.

Anterior: CG1-30C Máquina de corte a gás de chama portátil alimentada por bateria

Próximo: CG1-100 Melhor máquina de corte a oxigênio

1. Hoses: Oxygen hose, Preheating oxygen hose and cutting oxygen hose 2. Cross moving hand wheel： To adjust horizontal position of torch. 3. Cremalheira móvel cruzada 4. Vertical adjusting hand wheel of torch 5. Gorjeta 6. Thermal baffle: To prevent heat to diffuse into the inner of machine. 7. Fuel gas two-port valve: To adjust the flow. 8. total switch of gas distributor 9. admission junction: three groups 10. . Clutch hand knob：“STOP” is declutched; “START” is combined. 11. Adjusting speed knob： It can increase the cutting speed along “0” toward “10” clockwise, and decrease the speed along “10” toward “0” anti-clockwise. 12. Heavy punch： 13. Universal wheel：

PRODUTOS

1. Peso	：29.5 kilograms
2. Dimensão da máquina	：435mm×210mm×240mm
3. Controle de velocidade	：Silicon control
4. Fonte de alimentação	：CA 220V±10％ 50HZ
5. Velocidade de corte	：50～750/mm/min
6. Espessura de corte	: 5-100mm
7. Ângulo da ranhura	：0-45 degrees
8. Diâmetro do círculo de corte	：ø200-ø2000mm
9.Dica	：G02(acetileno),G03(propano)
10.Motor	：DC 110V 50HZ 30W 4200r/min
11.Sharp of bevel	：V, Y, K, X
12．Floating range of cutting torch	：0-55MM

1. Corpo	conjunto 1
2. Montagem da unidade da tocha	1set
3. Montagem da unidade móvel	1set（including left-right, up-down moving unit assemblage and gear rack）
4. Ponta (acetileno)	1# 2# 3# 3 pc each
5. Fio de alimentação	1pc
6.Specification sheets and certificate of qualification	1 unidade cada
7. Gas-in connector /pressure cat	2 define
8. Ball-pane screw M4	2pc
9.bevel unit assemblage	1set(floating device and contour wheel)
10. Soco pesado	2 pc
Random standard accessory
1. Cutting circle unit assemblage	1set
2.guide（option）	1）2 pc of convex guide rail（1.8m/pc）
2.guide（option）	2）1 pc of grooved guide rail（1.8m/pc）
Acessório opcional	2 pc of grooved guide rail（1.2m/pc）

CG1-30sp-400 Máquina de chanfrar e cortar oxi-combustível portátil multitocha