GCD-300 flame cutting Machine for high thickness plate

Nama model:
Mesin pemotong api GCD-300 untuk pelat dengan ketebalan tinggi
Deskripsi Produk
“GCD2-300”thick plate cutter is a kind of light cutter. Intermediate pressure gas and high pressure oxygen are used in the machine which can cut 6 to 300mm thick plates. The cutter is used in line cutting with efficiency. The structure of cutter is compacted and the cutter is easy to operate, free to move, safe to use. Cutting needs short auxiliary time. The cutter is used in heavy-duty mechanical industry, steel plant and shipbuilding industry.

Ikuti Kami:

Sebelumnya: CG1-30F Mesin Pemotong Gas Persegi Sudut Kanan

Selanjutnya: GCD3-100 Mesin pemotong lurus tiga obor

1. Gas two port valve：Adjust gas flow 9. Gas distributor 2. Preheating oxygen valve 10.Adjusting speed hand wheel：Adjust speed of machine walking 3. Cutting oxygen valve 11. Clutch handle 4. Traversing hand wheel： Rotate hand wheel to make torch move horizontally. 12. Jaw track 5. Traversing gear rack 13. Torch adjusting hand wheel: Rotate hand wheel to adjust distance between tip and steel plate. 6. Tubuh 7. Hose for delivering gas 8. Quick switch handle: Handle has three step switches. They are close preheating and cutting. If the step is close, all gas is close. 14. Torch 15. Thermal baffle: Impede heat diffusion to machine inner.

PRODUK

1. Tubuh	1set
2. Torch	1set
3. Tip (acetylene) 6＃、7＃、8＃	3pcs
4. Kunci pas	1pc
5. Seat of moving up and down	1set
6. Seat of moving left and right (Include traversing gear rack)	1set
7. Power cable	1set
8. Radius (allocate screw)	1set
9. Specification sheets and certificate of qualification	1set
10. Joint of inlet gas	1set
11. Bulb screw	2pcs
Aksesori standar
1. Radius bar	1pc
2. Groove guide rail	1set

Mesin pemotong api GCD-300 untuk pelat dengan ketebalan tinggi

1. Gas two port valve：Adjust gas flow	9. Gas distributor
2. Preheating oxygen valve	10.Adjusting speed hand wheel：Adjust speed of machine walking
3. Cutting oxygen valve	11. Clutch handle
4. Traversing hand wheel： Rotate hand wheel to make torch move horizontally.	12. Jaw track
5. Traversing gear rack	13. Torch adjusting hand wheel: Rotate hand wheel to adjust distance between tip and steel plate.
6. Tubuh
7. Hose for delivering gas
8. Quick switch handle: Handle has three step switches. They are close preheating and cutting. If the step is close, all gas is close.	14. Torch
	15. Thermal baffle: Impede heat diffusion to machine inner.