Internasional: Bahasa Inggris
España
русский
Prancis
Português
Indonesia
-
Nama model:
HK-30G Mesin pemotong baja tahan karat pneumatik
- Deskripsi Produk
This cutting machine adopts the indispensable cutting oxygen to drive the car, achieves walk function automatically and doesn’t need any other external power source.
Sebelumnya: CG1-100 Mesin pemotong oksigen tipe yang ditingkatkan
Selanjutnya: Mesin Pemotong Oksigen CG1-30MAX-3
-
1. Gas hose (A total of three).
2. Big hand wheel: to adjust cutting torch’s movement (towards the left or right).
3. Little hand wheel: to adjust cutting torch’s movement (upward or downward).
4. Clutch handle: could be self-latching away from the reducer, so it is convenient for the carriage’s fast moving.
5. Heat insulation board: to impede heat diffusion towards the machine interior.
6. Roda universal
7. Straight track (concave type 1800 mm).
8. Preheat oxygen valve: to adjust the flow of preheating oxygen.
9. Fuel gas valve: to adjust the flow of fuel gas.
10. Cutting oxygen valve: to adjust the flow of cutting oxygen.
11. Gas inlet connector: a total of two; left-hand thread connector is to be connected to the fuel gas supply; right-hand thread connector is to be connected to the oxygen supply.
12. Speed regulating hand wheel: calibration range of the hand wheel is "0 to 10", corresponding machine speed adjustment is between 0 and 1000 mm.
Shanghai Huawei Welding & Cutting Machine Co., Ltd..
