HK-100K Vertical Line Auto Weld Machine Swing-type Welding Tractor

Model Name:
HK-100K Vertical Line Auto Weld Machine Swing-type Welding Tractor
Product Description
HK-100K tractor is automatic device. It can get wider welding seam after a time welding.You can adjust swing speed, swing angle, off-set position of centre and stopping time of left and right. It is suitable for various beads. The biggest speed is 1250mm/min in weldless

Previous : HK-100KE Vertical straight stitch oscillation welding tractor with movable controller

Next : HK-100 Magnetic Straight Welding Swing Model Oscillation Auto Weld carriage

HK-100K is made up of body, control case, X-Y slide blocks, blowtorch holder, guide wheel and straight track. １）Body: It is the driving device, which includes motor, planet reducing box, driving gear and track wheel. ２）Control casing: To control the movement of carriage. Please refer to control panel manual. ３）Cross device: You can use it in the process of straight welding (such as container case) to adjust the position of torch in case of moving track. ４）X-Y trimming slide blocks: It is convenient to adjust the blowtorch up and down or left and right. ５）Swing device: To execute various welding model. ６）Holder of blowtorch: It can hold the blowtorch and adjust the angle of blowtorch easily. Notice: Must not hold the conductive section, which may lead to short out or electric shock. ７）Plug seat of source: It is the plug seat of external electric cable, which is connected with earth wire.

PRODUCTS

1.weight	8.4Kg（including wig-wag）
2.size	430mm×280mm×290mm
3.swinging motor	DC 24V
4.Driving	Driving of chain gear
5.walking speed	50～1250mm/min
6. range of blowtorch	Up and down		40mm
	Left and right		120mm
	Job angle adjusting range		±60°
	Running angle adjusting range		10°
7.functions	Walking direction	Fore and after
	Swing speed	0～100
	Left-stop time and right-stop time	0～2.5 s
	Swing angle	±15°
	Off-set distance	0～±8°
8.swing model

welding wire diameter welding parameter		Φ1.2mm	Φ1.4mm	Φ1.6mm
current（A）	Down hand welding	120-300	150-380	180-430
	flush fillet welding	120-280	150-320	180-380
	horizontal welding	120-280	150-300	180-330
voltage（U）	U＝14+0.051 300A under U=0.041+16±1.50 above 300A U=0.041+20±2.0
distance between nozzle and workpiece（H）	Below 200A:　H=10～15mm 200～350A　 H＝15～20mm 350～500A　 H＝20～25mm
welding extension length（L）	The length is about 10 times welding wire diameter. It is L=10d

1.	Host machine	1set
2.	Straight track（2m/pc）	1pc
3.	Standard power cord 220V/16M	1pc
4.	fuse 220V/2A	2sets
5.	Inner hexagon spanner	1set
6.	specification sheets	1pc
7.	Certificate of qualification	1pc