• Model Name:

    HK-5C Standard Classic Model Weling Carriage

  • Product Description
  • HK-5C is an equipment that can be used for chopping or continuous horizontal fillet welding.The maximum running speed of the welding barrow at the time of non-welding is 1900mm/min.Then the hold type hand handle, the convenience moves device. There is device for runoff and the runoff time is 0-7S.The welding can be left or right, and there are inductive switches on both sides of the barrow, so when welding is finished, the barrow can automatically stop, this is convenient for one worker to operate several equipments.

Follow Us:

Outside view

Composition illustration

The HK-5C is made up of the body of the barrow、X-Y gliding block、directive wheel、inductive switch in the torch、magnetron hand grip、and control casing and so on.

1. Driving part: the device for driving the barrow is composed of four rubber rims,angle gears, catena and rag wheels

2. X-Y gliding block: the device for adjusting the position of the torch, and fine turning for up 、down、 left and right.

3. Welding torch clip: the device for fixing the torch.

4. Directive wheel: the device that is rolling on the surface of the base mental as a guide to the correct welding position.

5. Magnetron hand grip: the device for the convenience of fixing and shifting the barrow .

6. Control casing: adjust all the actions of the barrow, there are details in the control panel illustration section.  

7. Magnet: The permanent-magnet can prevent the barrow from getting away from the sealing wire.

8. Inductive stop switch: the barrow automatically stops when welding the end of the work piece.

Application circumstance

Main technical parameter

1. Weight


2. Dimension


3. Power source

DC 24V

4. Shifting

Four-wheel drive(Rubber rim)

5. Speed of travel

30~1900mm/min(Display on the nixie tube)

6. Adjustable range of the torch

Up and down


Font and back


Working angle range


Moving angle range


7. Operation function

Choice of moving direction

Left and right

Setting of the speed of travel

Display on the nixie tube

Welding parameter

                welding wire diameter

welding parameter






downhand welding




flush fillet welding




horizontal welding





  1. U=14+0.051
  2. 300A under  U=0.041+16±1.50
  3. above 300A   U=0.041+20±2.0

distance between nozzle and workpiece(H)

  1. Below 200A: H=10~15mm 
  2. 200~350A  H=15~20mm
  3. 350~500A  H=20~25mm

welding extension length(L)

The length is about 10 times welding wire diameter. It is L=10d

Contents of package

NAME:Standard angle welding Auto carriage



1. Standard power cord 220V/20M                   one set

2. 2P torch control line 500mm                      one set

3. Fuse 220V/2A                                  two sets

4. Inner hexagon spanner                        one set

5. Instruction book                                 one set

6. Conformity certificate                            one set

© Copyright: Shanghai Huawei Welding & Cutting Machine Co., Ltd.. All rights reserved. - Privacy policy | Terms and Conditions

If you have any questions, please send an e-mail inquiry