• Chariot de Weling modèle classique standard HK-5C
  • Chariot de Weling modèle classique standard HK-5C
  • Chariot de Weling modèle classique standard HK-5C
  • Chariot de Weling modèle classique standard HK-5C
  • Nom du modèle:

    Chariot de Weling modèle classique standard HK-5C

  • Déscription
  • HK-5C is an equipment that can be used for chopping or continuous horizontal fillet welding.The maximum running speed of the welding barrow at the time of non-welding is 1900mm/min.Then the hold type hand handle, the convenience moves device. There is device for runoff and the runoff time is 0-7S.The welding can be left or right, and there are inductive switches on both sides of the barrow, so when welding is finished, the barrow can automatically stop, this is convenient for one worker to operate several equipments.


Vue extérieure

Composition illustration

The HK-5C is made up of the body of the barrow、X-Y gliding block、directive wheel、inductive switch in the torch、magnetron hand grip、and control casing and so on.

1. Driving part: the device for driving the barrow is composed of four rubber rims,angle gears, catena and rag wheels

2. X-Y gliding block: the device for adjusting the position of the torch, and fine turning for up 、down、 left and right.

3. Welding torch clip: the device for fixing the torch.

4. Directive wheel: the device that is rolling on the surface of the base mental as a guide to the correct welding position.

5. Magnetron hand grip: the device for the convenience of fixing and shifting the barrow .

6. Control casing: adjust all the actions of the barrow, there are details in the control panel illustration section.  

7. Magnet: The permanent-magnet can prevent the barrow from getting away from the sealing wire.

8. Inductive stop switch: the barrow automatically stops when welding the end of the work piece.

Circonstance d'application

Paramètre technique principal

1. Weight


2. Dimension

320mm × × 230mm 290mm

3. Power source

DC 24V

4. Shifting

Four-wheel drive(Rubber rim)

5. Speed of travel

30~1900mm/min(Affichage sur le tube nixie)

6. Adjustable range of the torch

Up and down


Font and back


Working angle range

± 45 °

Moving angle range

± 10 °

7. Operation function

Choice of moving direction

Left and right

Setting of the speed of travel

Display on the nixie tube

paramètres de soudage

                diamètre du fil de soudage

paramètre de soudage






soudage à plat




soudage d'angle affleurant




soudure horizontale




tension (U)

  1. U = 14 + 0.051
  2. 300A sous U=0.041+16±1.50
  3. au dessus de 300A U=0.041+20±2.0

distance entre la buse et la pièce (H)

  1. Au-dessous de 200A : H=10~15mm 
  2. 200~350A H=15~20mm
  3. 350~500A H=20~25mm

welding extension length(L)

La longueur est d'environ 10 fois le diamètre du fil de soudage. C'est L=10d

Contenu de l'emballage

NAME:Standard angle welding Auto carriage



1. Standard power cord 220V/20M                   one set

2. 2P torch control line 500mm                      one set

3. Fuse 220V/2A                                  two sets

4. Inner hexagon spanner                        one set

5. Instruction book                                 one set

6. Conformity certificate                            one set

© Copyright : Shanghai Huawei Welding & Cutting Machine Co., Ltd.. Tous droits réservés. - Politique de confidentialité | Conditions générales

Si vous avez des questions, veuillez envoyer une demande par e-mail