CG2-11 Magnetic pipe gas cutter

Nom du modèle:
CG2-11 coupe-gaz magnétique
Déscription
It is convenient to operate the “CG2-11”. It can cut pipes, the diameters of which are above 100mm. It is used in many fields such as ship, mechanism, electric, petroleum industry and so on.This machine is a advanced pipe gas cutter. It has impacted structure, light weight and can cut continuously.

Précédent: Coupe-tube à main CG2-11G Machine de découpe Picle

Suivant: Machine de découpe de gaz pour tuyaux en acier inoxydable CG2-11B

1. Corps 8．Thermal baffle：To prevent heat to diffuse into the inner of machine. 2 .Cross feeding hand wheel To adjust horizontal position of torch. 9.Two-port valve：To adjust the flow. 3. Hoses：Connect them to gas distributor. There are three hoses: preheating oxygen hose, fuel gas hose and cutting oxygen hose. 10.Gas distributor：Gases are: preheating oxygen, fuel gas and cutting oxygen. 11 Speed regulating knob：Decrease the speed along “10” toward “0” anti-clockwise. 4．Torche 5. Adjusting hand wheel of torch 12．Plug seat 6．Handlebar 13．Magnetic roller wheel：The two magnetic roller wheels can make the machine walk along pipe wall smoothly. 7．Reversing switch：To change the direction of machine. “STOP” position is in the middle.

PRODUITS

1. Poids (corps)	14.5KG
2. Dimensions de la machine	305 MM X 310 MM X 180 MM
3. Source d'alimentation	220V 50HZ
4. Vitesse de coupe	50-750MM/MIN
5. Épaisseur de coupe	6-50MM
6. Angle de rainure	0 ° -45 °
7. Cutting range	￠＞108MM(The no-seam pipe)
8) Cutting accuracy	When the machine walks a cycle on pipe, the error is below 0.5mm every 1m circumference. The smoothness of cutting and groove can reach
9. Adsorption affinity of magnetic roller wheel	Above 50kiograms
10. Impulse of machine.	When the machine walks up and down, it is below 0.5mm.
11. Moteur	It adopts 70SZ08 servo-motor. 6000r/min, 68W

1.Emballage standard
1） Corps principal	:1 jeu
2） Assemblage de l'unité de torche standard	:1 jeu
3） Connecteur de torche	:1 jeu
4） Tip	： 3 pièces
6) Gas-in connector	:1 jeu
7） Electric case and connecting wire	:1 jeu
8) Specification sheets and certificate of qualification	：1 pc each
9) Safety rope	：1pc
10） Safety buckle	：1pc
11） fuse(3A)	：1pc

CG2-11 coupe-gaz magnétique

1. Corps	8．Thermal baffle：To prevent heat to diffuse into the inner of machine.
2 .Cross feeding hand wheel To adjust horizontal position of torch.
	9.Two-port valve：To adjust the flow.
3. Hoses：Connect them to gas distributor. There are three hoses: preheating oxygen hose, fuel gas hose and cutting oxygen hose.	10.Gas distributor：Gases are: preheating oxygen, fuel gas and cutting oxygen.
	11 Speed regulating knob：Decrease the speed along “10” toward “0” anti-clockwise.
4．Torche
5. Adjusting hand wheel of torch	12．Plug seat
6．Handlebar	13．Magnetic roller wheel：The two magnetic roller wheels can make the machine walk along pipe wall smoothly.
7．Reversing switch：To change the direction of machine. “STOP” position is in the middle.