CG2-11D Automatic pipe gas cutter

Nom du modèle:
Coupe-gaz automatique CG2-11D
Déscription
“CG2-11D” pipe gas cutter is small pipe cutter, the development of which is based on investigation of actual cases. It has good performance to cut various pipes and groove cut. The machine adopts motor shift driving, which has many merits, such as high precision and smooth.

Précédent: Machine de découpe de gaz pour tuyaux en acier inoxydable CG2-11B

Suivant: Coupe-flamme de tuyau CG2-11D-PII type manuel

It uses chains to lock pipe and you can increase or decrease chain according to the diameter of pipe. The machine is made of A-alloy. It has impacted structure, light weight and can cut continuously. 1.Hose：Connect them to gas distributor. There are three hoses: preheating oxygen hose, fuel gas hose and cutting oxygen hose. 6．Roller wheel ：To make the machine walks smoothly on the pipe wall. 2. Sliding support 7. Wing nut：Revolve it to tighten the chain to fix machine on pipe. 3.Cross feeding hand wheel ：To adjust horizontal position of torch. 8.Gas distributor：Gases are preheating oxygen, fuel gas and cutting oxygen. 4．Lift hand knob of torch：To adjust the height of torch. 9.Body 5. Torch：The cutting thickness is about 5-50mm 10. Chain

PRODUITS

1. Poids (corps)	16KG
Accessoire	7.8KG
2. Dimension de la machine	280mmX280mmX450mm
3. Source d'alimentation	AC 220V±10％
4. Vitesse de coupe	50～1150mm/minute
5. Épaisseur de coupe	5-50mm
6. Groove angle	0 ° à 45 °
7. Cutting diameter	ø150-ø600mm
8. Astuce	GO2(acetylene) GO3(propane)
9. Moteur	70ZYT08 85W 6000r/min
Accessoire
Tip GO2(acetylene) or GO3(propane) #1,#2,#3		1 pièce chacun
Nettoyant pointe		1set
Chain(82 chain shackle)		1set
Electric appliance case		1pc
clé		1pc
fusible		2pcs
Avis: The biggest cutting diameter is 600mm due to the collateral chain. If the cutting diameter is above 600mm, you should increase chain which need be purchased.

1） Main body	1set
2） Standard torch unit assemblage	1set
3） Connector of torch	1set
4) Electric case	1set
5) Tip cleaner	1set
6） Tip GO2(acetylene) GO3(propane)	1 pièce chacun
7） Chain(82 chain shackle)	1 jeu
8） Fuse (2A)	2 pièces
9） Specification sheets and certificate of qualification	1 pièce chacun

Coupe-gaz automatique CG2-11D

1.Hose：Connect them to gas distributor. There are three hoses: preheating oxygen hose, fuel gas hose and cutting oxygen hose.	6．Roller wheel ：To make the machine walks smoothly on the pipe wall.
2. Sliding support	7. Wing nut：Revolve it to tighten the chain to fix machine on pipe.
3.Cross feeding hand wheel ：To adjust horizontal position of torch.	8.Gas distributor：Gases are preheating oxygen, fuel gas and cutting oxygen.
4．Lift hand knob of torch：To adjust the height of torch.	9.Body
5. Torch：The cutting thickness is about 5-50mm	10. Chain