logo
  • Carro de soldadura de riel mini compacto HK-20
  • Marca:

    Carro de soldadura de riel mini compacto HK-20

  • Descripción del producto
  • HK-20 carriage is multi-use automatic device, which is suitable for abutting joint, horizon welding, vertical welding and cross welding.The carriage adopts gear and gear rack driving mode. It can walk on rail which is parallel with work. The speed is smooth. The system adopts silicon control infinitively variable speeds to finish accurate welding. The biggest speed on “No-welding” state is 1300mm/min.

Síguenos:

Nombre y función de cada sección

HK-20 is made up of body, control case, X-Y slide blocks, blowtorch holder, guide wheel and straight rail.

1.Body: It is the driving device, which includes motor, planet reducing box, driving gear and guide wheel.

2.Hand knob:It is used to move this machine. Please hold it fully.

3.Electric cabinet:To control the movement of carriage. Please refer to control panel manual.

4. Cross device: You can use it in the process of straight welding (such as container case) to adjust the position of torch in case of moving rail.

5. Straight rail: It is equipped with permanent magnet to make the rail absorb to works to meet different welding needs.

6. Magnet: Strong on-off magnet. If you want to move the rail, please turn all magnetron switches “OFF”.

7. X-Y trimming slide blocks: It is convenient to adjust the blowtorch up and down or left and right.

8. Holder of blowtorch: It can hold the blowtorch and adjust the angle of blowtorch easily.

Notice: Must not hold the conductive section, which may lead to short out or electric shock.

9. Plug seat of source: It is the plug seat of external electric cable, which is connected with earth wire.

10. Hand knob: It is convenient to make carriage move freely on the rail.

11. Thermal baffle: To prevent carriage from being damaged by source of heat.

parámetros principales

Peso

6.25Kg

Driving mode

Gear, gear rack driving

Draft load

16 kilogramos

Velocidad

50~~800 (mm/min)

Tracking mode

Carril

Adjusting range of torch

Horizontal angle:40°~55°

Move up and down:45 mm

Move fore and after:45 mm

Antorcha

Bending torch or straight torch

Locking device of torch

Suitable for bending or straight torch

Outline dimension

350mmx240mmx250mm

Parámetros técnicos de soldadura

                diámetro del alambre de soldadura

parámetro de soldadura

Φ1.2mm

Φ1.4mm

Φ1.6mm

 

corriente (A)

Soldadura manual hacia abajo

120-300

150-380

180-430

soldadura de filete al ras

120-280

150-320

180-380

soldadura horizontal

120-280

150-300

180-330

voltaje (U)

  1. U=14+0.051
  2. 300A bajo U=0.041+16±1.50
  3. por encima de 300A U=0.041+20±2.0

distance between nozzle and workpiece(H)

  1. Por debajo de 200A: H=10~15mm 
  2. 200~350A H=15~20mm
  3. 350~500A H=20~25mm

longitud de extensión de soldadura (L)

La longitud es aproximadamente 10 veces el diámetro del alambre de soldadura. es L=10d

 Contenido del paquete

1.

Body

1set

2.

Control wire

1pc

3.

Magnetron rail

1pc(1.8m)

4.

fusible

1set

5.

hex wrench(M4/M5/M6)

1set each

6.

Operating manual , Certificate of qualification

1pc cada uno

parte superior
© Copyright: Shanghai Huawei Welding & Cutting Machine Co., Ltd.. Todos los derechos reservados. - Política de privacidad | Términos y Condiciones

Si tiene alguna pregunta, envíe una consulta por correo electrónico.