logo
  • Máquina cortadora de oxígeno de tipo mejorado CG1-100
  • Máquina cortadora de oxígeno de tipo mejorado CG1-100
  • Marca:

    Máquina cortadora de oxígeno de tipo mejorado CG1-100

  • Descripción del producto
  • “CG1-100” gas cutting machine (two torches) is one of main products of our company. It is designed well and beautiful. We do technical innovations and optimizations for it based on “CG1-30”. 

Síguenos:

 

1.Hoses:Oxygen hose, Preheating oxygen hose and cutting oxygen hose

2.Cross moving hand wheel: To adjust horizontal position of torch.                             

 3. Cross moving gear rack

4. Vertical adjusting hand wheel of torch                        

5. Propina                                                                                   

6. Clutch hand knob: “STOP” is declutch; “START” is combine.

7. Thermal baffle: To prevent heat to diffuse into the inner of machine.         

8. Motor. Changeover switch: To control the direction of machine, “stop” position is in the

  medio.

 9. Fuel gas two-port valve: To adjust the flow.

10.Preheating oxygen two-port valve: To adjust the flow.

11 Cutting oxygen two-port valve: To adjust the flow.

12.Heavy punch:                     

13. Gas distributor: It has three blocks, “open”, “preheating”, “cutting”     

14. Fusible

15. Máquina principal

16. Electric outlet

 17. Adjusting speed knob: It can increase the cutting speed along “0” toward “10” clockwise, and decrease the speed along “10” toward “0” anti-clockwise.

18.Universal wheel:

ESPECIFICACIONES DE PRODUCTO

1.Weight

21 kilogramos

Accesorio

7.8 kilogramos

2. Dimensión de la máquina

435mm × × 210mm 240mm

3. Control de velocidad

Silicon control

4. Fuente de energía

CA 220V±10% 50HZ

5. Velocidad de corte

50~750/mm/min

6. Espesor de corte

5-100mm

7. Ángulo de ranura

0-45 grados

8.Diameteral of cutting circle

ø200-ø2000mm

9. Consejo

G02(acetylene),G03(propane)

10.Motor

DC 110V  50HZ  30W   4200r/min

Contenido del paquete

1. Cuerpo

1 juego

2. Montaje de la unidad de antorcha

1set

3. Montaje de la unidad móvil

1 juego (incluido el ensamblaje de la unidad de movimiento arriba-abajo de izquierda a derecha y la cremallera)

4. Consejo

#1  2  3 , 2 pc each (acetylene)

5.Heavy punch

1set

6. cable de alimentación

1pc

7. Hojas de especificaciones y certificado de calificación

1 pieza cada uno

8. Conector de entrada de gas/gato de presión

1set

9.Tornillo esférico M4

2pc

accesorio estándar

 

1. Conjunto de unidad de círculo de corte

1set

2.carril de guía convexo

2pc(1.8m/pc)or grooved guide rail 1pc(1.8m)


  

parte superior
© Copyright: Shanghai Huawei Welding & Cutting Machine Co., Ltd.. Todos los derechos reservados. - Política de privacidad | Términos y Condiciones

Si tiene alguna pregunta, envíe una consulta por correo electrónico.