• Carro de soldadura modelo clásico estándar HK-5C
  • Carro de soldadura modelo clásico estándar HK-5C
  • Carro de soldadura modelo clásico estándar HK-5C
  • Carro de soldadura modelo clásico estándar HK-5C
  • Marca:

    Carro de soldadura modelo clásico estándar HK-5C

  • Descripción del producto
  • HK-5C is an equipment that can be used for chopping or continuous horizontal fillet welding.The maximum running speed of the welding barrow at the time of non-welding is 1900mm/min.Then the hold type hand handle, the convenience moves device. There is device for runoff and the runoff time is 0-7S.The welding can be left or right, and there are inductive switches on both sides of the barrow, so when welding is finished, the barrow can automatically stop, this is convenient for one worker to operate several equipments.


Vista exterior

Composition illustration

The HK-5C is made up of the body of the barrow、X-Y gliding block、directive wheel、inductive switch in the torch、magnetron hand grip、and control casing and so on.

1. Driving part: the device for driving the barrow is composed of four rubber rims,angle gears, catena and rag wheels

2. X-Y gliding block: the device for adjusting the position of the torch, and fine turning for up 、down、 left and right.

3. Welding torch clip: the device for fixing the torch.

4. Directive wheel: the device that is rolling on the surface of the base mental as a guide to the correct welding position.

5. Magnetron hand grip: the device for the convenience of fixing and shifting the barrow .

6. Control casing: adjust all the actions of the barrow, there are details in the control panel illustration section.  

7. Magnet: The permanent-magnet can prevent the barrow from getting away from the sealing wire.

8. Inductive stop switch: the barrow automatically stops when welding the end of the work piece.

Circunstancia de aplicación

Parámetros técnicos principales

1. Peso


2. Dimension

320mm × × 230mm 290mm

3. Fuente de energía

CC 24V

4. Shifting

Four-wheel drive(Rubber rim)

5. Speed of travel

30~1900mm/min(Display on the nixie tube)

6. Adjustable range of the torch

Arriba y abajo


Font and back


Working angle range

± 45 °

Moving angle range

± 10 °

7. Operation function

Choice of moving direction

Izquierda y derecha

Setting of the speed of travel

Display on the nixie tube

parámetro de soldadura

                diámetro del alambre de soldadura

parámetro de soldadura





corriente (A)

downhand welding




soldadura de filete al ras




soldadura horizontal




voltaje (U)

  1. U=14+0.051
  2. 300A bajo U=0.041+16±1.50
  3. por encima de 300A U=0.041+20±2.0

distancia entre la boquilla y la pieza de trabajo (H)

  1. Por debajo de 200A: H=10~15mm 
  2. 200~350A H=15~20mm
  3. 350~500A H=20~25mm

longitud de extensión de soldadura (L)

La longitud es aproximadamente 10 veces el diámetro del alambre de soldadura. es L=10d

Contenido del paquete

NAME:Standard angle welding Auto carriage



1. Standard power cord 220V/20M                   one set

2. 2P torch control line 500mm                      one set

3. Fuse 220V/2A                                  two sets

4. Inner hexagon spanner                        one set

5. Instruction book                                 one set

6. Conformity certificate                            one set

parte superior
© Copyright: Shanghai Huawei Welding & Cutting Machine Co., Ltd.. Todos los derechos reservados. - Política de privacidad | Términos y Condiciones

Si tiene alguna pregunta, envíe una consulta por correo electrónico.