Tractor de soldadura por succión lateral automático electromagnético portátil HK-4B

HK-4B is made up of the following sections:

1）Hand knob: It is convenient to equip, take apart and move the carriage.

2）Motor: It is power unit of carriage and welding.

3）X-Y trimming slide blocks: It is convenient to adjust the blowtorch up and down or left and right.

4）Holder of blowtorch: It can hold the blowtorch and adjust the angle of blowtorch easily.

5）Position switch: When the carriage goes to the end of work, it will contact the position switch

   y pare.

6）Permanent magnet: It can absorb to the surface of work in case of damaging the machine and

   falling from the welding line.

7）Electric cabinet: To control the movement of carriage. Please refer to control panel manual.

8）Magnetic iron-tyred: When cutting the power on, it adsorbs the surface of work. But the

   magnetic disappears when cutting power off. So, you should take the carriage down and cut

   apagado.

9）Electric cabinet: To control the movement of carriage. Please refer to control panel manual.

 Diagrama

Parámetros técnicos