-
Marca:
Tractor de soldadura por oscilación de puntada recta vertical HK-100KE con controlador móvil
- Descripción del producto
The machine can be used for straight welding, and wavering function also is able to do wide welding seam.The machine uses a brushless-motor-driven to ensure the machine move steadily and high-quality welding performance.
Próximo : Máquina de soldadura automática de línea vertical HK-100K Tractor de soldadura de tipo oscilante
HK-100KE is made up of body, control case, X-Y slide blocks, blowtorch holder, guide wheel and straight track.
1)Cuerpo: Es el dispositivo impulsor, que incluye motor, caja reductora planetaria, engranaje impulsor y rueda guía.
2)Carcasa de control: para controlar el movimiento del carro. Consulte el manual del panel de control.
3)Dispositivo cruzado: puede usarlo en el proceso de soldadura recta (como la caja de un contenedor) para ajustar la posición de la antorcha en caso de que la pista se mueva.
4)Welding torch lifting slider: It is a device for adjusting the welding torch location, could do the up and down fine-tuning during welding.
5)Dispositivo oscilante: para ejecutar varios modelos de soldadura.
6)Welding gun holder: It is a device for fixing the welding gun, when using it, should clamp the welding gun, be careful not to clamp the conductive parts, otherwise it will cause a short circuit or electric shock.
7)Ten-core socket: It is a swing controller’s cable connection socket, the connection cable is about 1 meter long, and the other end of cable is the eight-core plug, which is connected to the swinger socket.
8)Hand knob:It is used to move this machine. Please hold it fully.
9)The clutch handle: press the handle, make the gear out, to achieve machine’s fast move.
10)Straight track: It is equipped with permanent magnet to make the track absorb to works to meet different welding needs.
11)Magnet: Strong on-off magnet. If you want to move the track, please turn all magnetron switches “OFF”.
12)Welding gun fine-adjusting device: can accurately guide the welding gun to aim welding position.
13)Cable bracket: You can use it to carry cable to reduce the load of swing machine
14)Blowtorch: User can choose straight blowtorch or bend blowtorch.