-
Marca:
Tractor de soldadura de tanque de tubería de riel flexible HK-100S con soporte de antorcha oscilante
- Descripción del producto
HK-100S tractor is automatic device. It can get wider welding seam after a time welding. It is very suitable for arc welding, the diameter of which is more than 750MM.You can adjust swing speed, swing angle, off-set position of centre and stopping time of left and right. It is suitable for various beads. The biggest speed is 1250mm/min in weldless station.
-
Constitución
HK-100S is made up of body, control case, X-Y slide blocks, blowtorch holder, guide wheel and straight track.
1)Cuerpo: Es el dispositivo impulsor, que incluye motor, caja reductora planetaria, engranaje impulsor y rueda guía.
2)Carcasa de control: para controlar el movimiento del carro. Consulte el manual del panel de control.
3)Dispositivo cruzado: puede usarlo en el proceso de soldadura recta (como la caja de un contenedor) para ajustar la posición de la antorcha en caso de que la pista se mueva.
4)Bloques deslizantes de recorte XY: Es conveniente ajustar el soplete hacia arriba y hacia abajo o hacia la izquierda y hacia la derecha.
5)Dispositivo oscilante: para ejecutar varios modelos de soldadura.
6)Soporte del soplete: Puede sostener el soplete y ajustar el ángulo del soplete fácilmente. Aviso: no debe sujetar la sección conductora, lo que puede provocar un cortocircuito o una descarga eléctrica.
7)Plug seat of source: It is the plug seat of external electric cable, which is connected with earth wire.This plug seat is in charge of connecting carriage to feeder and supply the power for system. (There are two branches on the end of cable, one of which is used to connect feeder; another is used to connect source.)
1)Hand knob:It is used to move this machine. Please hold it fully.
2)On-off hand knob and demount hand knob:
8)Steel belt track: It is equipped with permanent magnet to make the track absorb to works to meet different welding needs. It is very suitable for arc welding, the diameter of which is more than 750MM.
9) Magnet: Strong on-off magnet. If you want to move the track, please turn all magnetron switches “OFF”.
10)Cable bracket: You can use it to carry cable to reduce the load of swing machine.
11)Blowtorch: User can choose straight blowtorch or bend blowtorch.
The HUAWEI welding carriage doen a lot welding project for oil tank, steel construction and shipbuilding.
To see the video you will find more information.