anterior: Máquina de corte en frío biseladora de preparación de extremos de tubería portátil modelo ZPK
Próximo : Biseladora de preparación de extremos de tubería eléctrica serie ISY corte en frío
-
GPK series internal expanding pipe cutter is a light cutter. It is designed for beveling of pipes, the diameters of which are Φ28~Φ360mm. This groove cutter adapts air motor as power. It is internal expanding and flexible. It is easy to operate it. The new design concept and excellent performance make it is advanced. This machine can do pipe groove cutting and flange cutting. Regardless of wall thickness, this machine has irreplaceable advantages in processing performance and efficiency compared with traditional crafts.
The model classified as GPK-28,GPK-80,GPK-150,GPK-250,GPK-250-II,GPK-351,GPK-351-II,GPK-630,GPK-630-II,GPK-850-II.Horizontal motor position model GPK-28 and GPK-80 outline.
1. Brace: To control the expansion of fastening block.
2. Locking nut: Revolve the nut to lock nut to make the fastening block expand. It can fix the machine to pipe.
3. Spindle axis
4. Feeding wheel: To revolve it to achieve feed or retract.
5. Cuerpo
6. Cutter head:Equip cutter blade to cutter head.
7. Fastening block:Choose a suitable fastening block according to the internal diameter. Fix the machine to internal wall of pipe by brace.
8. Tuerca de fijación
9. Fastening screw:The fastening screw and nut are used to fix the axis of fastening block.
10.Hand knob:Hold it to carry the machine.
11.Blade:You should choose a suitable blade according to angle of groove.
12.Planetary reduction box
13.air motor
14.silencer
15.valve handle
16.válvula
Vertical motor position model GPK-150,GPK-250,GPK-351,GPK-630 outline.
1. Abrazadera: Para controlar la expansión del bloque de sujeción.
2. Contratuerca: gire la tuerca contra la tuerca para hacer que el bloque de sujeción se expanda. Puede fijar la máquina a la tubería.
3. Tornillo de alimentación
4. Rueda de avance: Girarla para lograr avance o retracción.
5. Perilla manual: sosténgala para transportar la máquina.
6. Cuerpo
7. Blade:You should choose a suitable blade according to angle of groove.
8. Cone 9. The lower cone
11. Fastening screw: Select pooper fastening screw according to the inner diameter of steel pipe .fix the machine onto the inside wall of the work piece.
10. Bloque de sujeción: elija un bloque de sujeción adecuado según el diámetro interno. Fije la máquina a la pared interna de la tubería mediante abrazaderas.
12. Cutter head:Equip cutter blade to cutter head. 15. silencer
13. Motor reduction box 16. valve
14. air motor 17. Air intake joint
Automatic feeding model GPK-250-II,GPK-351-II,GPK-630-II,GPK-850-II outline.
This model is quite same as the GPK-150,GPK-250,GPK-351,GPK-630 model. Except the NO.7 auto feeding device.