CG2-11D/G Manual/automatic integrated pipe cutting machine

Model Name:
CG2-11D/G Manual/automatic integrated pipe cutting machine
Product Description
The machine has small volume, light weight, firm and durable integrated body. Low center of gravity design, stable running, convenient operation, good cutting circumference. The machine is provided with random battery prower, It can also realize the automatic cutting in the absence of an external power supply environment,and the battery is durability,

Previous : CG2-11G-PI Hand Pipe Cutter(Quick Install)

Next : CG2-11S Big hand manual pipe cutter picle cutting machine

can work for nearly 6 hours each time when fully charged. The machine can also be operated manually cutting, chamfering operation in case there is no electricity. Widely used in petroleum, chemical industry pipeline and other project pipeline cutting . 1.Hose：Connect them to gas distributor. There are three hoses: preheating oxygen hose, fuel gas hose and cutting oxygen hose. 6．Roller wheel ：To make the machine walks smoothly on the pipe wall. 2. The electric appliance box 7. Wing nut：Revolve it to tighten the chain to fix machine on pipe. 3.Cross feeding hand wheel ：To adjust horizontal position of torch. 8.Gas distributor：Gases are preheating oxygen, fuel gas and cutting oxygen. 4．Lift hand knob of torch：To adjust the height of torch. 9. Lithium battery 10.Body 5. Torch：The cutting thickness is about 5-50mm 11. Chain

PRODUCTS

1.Weight(body)	14.5 KG
Accessory	1.5 KG
2. Machine dimension	285mmX420mmX450mm
3. Power source	220V
4. Cutting speed	50～750mm/min
5. Cutting thickness	5-50mm
6. Groove angle	0°--45°
7. Cutting diameter	ø150-ø600mm
8.Tip	GO2(acetylene) GO3(propane)
9. Motor	HWR4H61-102 35W
Accessory
Tip GO2(acetylene) or GO3(propane) #1,#2,#3		1 pc each
Tip cleaner		1set
Chain(82 chain shackle)		1set
Electric appliance case		1PC
Wrench		1PC
Fuse		2PC
Notice: The biggest cutting diameter is 600mm due to the collateral chain. If the cutting diameter is above 600mm, you should increase chain which need be purchased.

1） Main body	1set
2） Standard torch unit assemblage	1set
3） Connector of torch	1set
4) Charging adapter	1pc
5) Electric case+ cable conductor	1set
6) Tip cleaner	1set
7） Tip GO2(acetylene) GO3(propane)	1pc each
8） Chain(82 chain shackle)	1 set
9） Fuse (2A)	2pc
10） Specification sheets and certificate of qualification	1 pc each

1.Hose：Connect them to gas distributor. There are three hoses: preheating oxygen hose, fuel gas hose and cutting oxygen hose.	6．Roller wheel ：To make the machine walks smoothly on the pipe wall.
2. The electric appliance box	7. Wing nut：Revolve it to tighten the chain to fix machine on pipe.
3.Cross feeding hand wheel ：To adjust horizontal position of torch.	8.Gas distributor：Gases are preheating oxygen, fuel gas and cutting oxygen.
4．Lift hand knob of torch：To adjust the height of torch.	9. Lithium battery
4．Lift hand knob of torch：To adjust the height of torch.	10.Body
5. Torch：The cutting thickness is about 5-50mm	11. Chain