CG2-150 Profiling flame cutter

Model Name:
CG2-150 Profiling flame cutter
Product Description
“CG2-150”profiling gas cutter is a kind of efficient and economic product. It is designed well and made of A-alloy. It can cut many shapes of pieces according to sample plate. The accuracy of cutting surface is good and the quality is high. The body is very small. So, it not only suits for company, but also suits for outdoor.

Previous : CG2-150B Rail Type Shape Flame cutter

1.Lift wheel of arm ：Release the screw of arm and adjust the wheel to make the arm unit assembly rise or fall. 7．Cross moving bar：Measuring scale is set on the fracture of cross moving bar. You can adjust the sample plate horizontally according to scale. 2.Power switch 3.Outlet 8．Frame of sample plate: To fix the sample plate and adjust the height of sample plate. 4.Hoses: There are four hoses: preheating, cutting, fuel gas and feeding gas for pressure switch. 5. Screw at the bottom: Make the machine horizontal on steel plate. 6. Locking screw of arm cross moving bar: If the position of sample plate is settled, you can fix the cross moving bar on the arm with locking screw. 9．Magnetic head 10.Speed regulating knob：Increase the speed if you revolve it along “0” to “10”. 11．Direction regulating switch: To change the rotary direction of magnetic head. 12．Lifting hand wheel of torch 13．Torch

PRODUCTS

1.Weight（Body）	：56.5 kg
2. Machine dimension	：1190×335×800mm
3.Speed control	：SCR
4.Power source	：220V 50HZ
5. Cutting speed	：50～750/mm/min
6. Cutting thickness	：5～100mm
7. The diameter of cutting circle.	：ø20～ø600mm
8. Length of cutting line.	：1200mm
9. Size of cutting rectangle.	：400mm×900mm, 450mm×750mm
10.Motor	：55/ZYT DC110V24W 3600r/min

1. Main body	1set
2. Standard torch unit assemblage	1set
3. Tip (acetylene )	3pcs
4.Power wire	1pc
5. Specification sheets and certificate of qualification	1pc each
6. Gas-in connector	1set
Standard accessory
1.balance bar	2pcs
2.Heavy punch	1set
3.Sample plate of circle	1set
4.Angle-iron and connecting pipe(CG2-150A)	1pc each

1.Lift wheel of arm ：Release the screw of arm and adjust the wheel to make the arm unit assembly rise or fall.		7．Cross moving bar：Measuring scale is set on the fracture of cross moving bar. You can adjust the sample plate horizontally according to scale.
2.Power switch
3.Outlet		8．Frame of sample plate: To fix the sample plate and adjust the height of sample plate.
4.Hoses: There are four hoses: preheating, cutting, fuel gas and feeding gas for pressure switch. 5. Screw at the bottom: Make the machine horizontal on steel plate. 6. Locking screw of arm cross moving bar: If the position of sample plate is settled, you can fix the cross moving bar on the arm with locking screw.
		9．Magnetic head
		10.Speed regulating knob：Increase the speed if you revolve it along “0” to “10”. 11．Direction regulating switch: To change the rotary direction of magnetic head.


		12．Lifting hand wheel of torch
		13．Torch