logo
  • CG2-1600 Circular oxygen cutting machine
  • Model Name:

    CG2-1600 Circular oxygen cutting machine

  • Product Description
  • “CG2-1600” semiautomatic cutter is made of A-alloy. The machine has two groups of speed change. It uses SCR to control speed. There are roller wheels on bottom of body. So, it is easy to move. The reducing box is used to change the speed to make the axis revolve. You can adjust the radius of cutting circle.

Follow Us:

It can cut on vertical steel plate and inclined plane. The machine improves efficiency, assures the quality and decreases the working strength.

 

 



1.Base: It contains two square steels as feet. In addition to stabilizing the body, the five

rollers installed at the bottom make it convenient to move the machine.

2.Upright square steel

3.Main cantilever:The cantilever stretches forward bearing all the impending part of the

   weight.

4.Control panel: Some functions such as start/stop、work direction and speed are controlled

   by it.

5.Sidesway device:When wanting to cut a larger circle, using this device can stretch

   outwards.

6.Motor and reduction gearbox:They are the core parts of the machine drive.

7.Gas rotating distributor:This distributor has reasonably solved the problem about the

   mechanical rotating and the distribution of gas path, avoiding the winding of gas path

   hose on the rotating machine.

8.Torch balance adjusting device:Place the machine on the steel plate stably, adjust the foot

   screw and shift the transmission into the neutral position, then make the torch a whirl. If

   the inconformityoccurred betweena certain point of torch andthe cutting positionof steel

   plate, you can regulate this device so as to solve it effectively.

9.Radius rod regulatorbase:Through this device you can regulate the position and the height

   of torch.

10.Centering base:This device is used for positioning the center of circle, ensuring the

    roundness of the cutting.

11.Torch: Here you can fine adjust the height from the steel plate and the cutting groove

    angle.


Specifications

1. Machine dimension

:1200×550×900(Length×Width×Height)

2. Weight(Body)

:60 KG

3.Cutting range

Diameter of cutting circle

:Ø400~Ø1600mm

Thickness of steel plate.

:5~100mm

Cutting speed

:0.2~7.2r.p.m

Cutting accuracy

:<1mm/1r

The round error is below 1mm/r. The roughness of cutting surface is

4.Motor

:ZTY-261 DC permanent magnetic motor

5. Rotational speed

: 6000 r.p.m.

6. Power

:68W

7.Voltage

:110V

8.Control case

Power

:AC 220V+10% 50HZ

Fuse

:1A

 Contents of package

Carefully take the machine out of its case.The contents of the standard package are shown below. Check them carefully before assembling the machine.

1.Body …………………………………..1set

2. Tip ……………………………………3pcs

3. Power wire……………………………1pc

4. Specification sheets…………………..1pc

5. Certificate of qualification…………...1pc

top
© Copyright: Shanghai Huawei Welding & Cutting Machine Co., Ltd.. All rights reserved.

If you have any questions, please send an e-mail inquiry